Rohde & Schwarz FSVA - Page 912

Remote Control
R&S
®
FSVA/FSV
912Operating Manual 1176.7510.02 ─ 09
<p> 1...4
Power sensor index
Parameters:
<Unit> DBM | WATT | W
*RST: DBM
Example:
UNIT:PMET:POW DBM
Usage: SCPI confirmed
Mode: PSM
Manual operation: See "Unit / Scale" on page 548
UNIT<n>:PMETer<p>:POWer:RATio
<Unit>
This command selects the unit for relative power sensor measurement for the selected
sensor.
Suffix:
<n>
.
irrelevant
<p> 1...4
Power sensor index
Parameters:
<Unit> DB | PCT
*RST: DB
Example:
UNIT:PMET:POW:RAT DB
Usage: SCPI confirmed
Mode: PSM
Manual operation: See "Unit / Scale" on page 548
UNIT:THD <Mode>
Selects the unit for THD measurements.
Parameters:
<Mode> DB | PCT
*RST: DB
Example:
UNIT:THD PCT
Mode: ADEMOD, SFM
Remote Control – Commands