Rohde & Schwarz FSVA - Page 927

Remote Control
R&S
®
FSVA/FSV
927Operating Manual 1176.7510.02 ─ 09
DISPlay:TOUChscreen:STATe <State>
This command turns the touch screen functionality on, off, or partially on.
Parameters:
<State> ON | OFF | FRAMe
ON
Touch screen function is active for entire screen
OFF
Touch screen is deactivated for entire screen
FRAMe
Touch screen is deactivated for the diagram area of the screen,
but active for the surrounding Softkeys, toolbars and menus.
*RST: ON
Example:
DISP:TOUC:STAT ON
DISPlay[:WINDow<n>]:TEXT[:DATA] <Comment>
This command defines a comment (max. 20 characters) which can be displayed in one
of the measurement windows.
Suffix:
<n>
.
Selects the measurement window.
Parameters:
<Comment> *RST: (empty)
Example:
DISP:WIND:TEXT 'Noise Measurement'
Defines the screen title.
Manual operation: See "Screen Title (On/Off)" on page 187
DISPlay[:WINDow<n>]:TEXT:STATe <State>
This command turns the display of the comment (screen title) on and off.
Suffix:
<n>
.
Selects the measurement window.
Parameters:
<State> ON | OFF
*RST: OFF
Example:
DISP:TEXT:STAT ON
Switches on the title.
DISPlay[:WINDow<n>]:TIME <State>
This command turns the display of date and time on and off.
Remote Control – Commands