Rohde & Schwarz FSVA - Page 929

Remote Control
R&S
®
FSVA/FSV
929Operating Manual 1176.7510.02 ─ 09
Suffix Description
CMAP12 Limit Lines
CMAP13 Limit and Margin Check – "Pass"
CMAP14 Limit and Margin Check – "Fail"
CMAP15 *) Softkey Text
CMAP16 *) Softkey Background
CMAP17 *) Selected Field Text
CMAP18 *) Selected Field Background
CMAP19 *) Softkey 3D Bright Part
CMAP20 *) Softkey 3D Dark Part
CMAP21 *) Softkey State "On"
CMAP22 *) Softkey State "Dialog open"
CMAP23 *) Softkey Text Disabled
CMAP24 Logo
CMAP25 Trace 4
CMAP26 Grid – Minorlines
CMAP27 Marker
CMAP28 Display Lines
CMAP29 *) Sweepcount – Text
CMAP30 Limit and Margin Check – Text
CMAP31 Limit and Margin Check – \"Margin\"
CMAP32 *) Table Overall – Title Text
CMAP33 *) Table Overall – Title Background
CMAP34 *) Table Overall – Text
CMAP35 *) Table Overall – Background
CMAP36 *) Table Value – Title Text
CMAP37 *) Table Value – Title Background
CMAP38 *) Table Value – Text
CMAP39 *) Table Value – Background
CMAP40 Trace 5
CMAP41 Trace 6
*) these settings can only be defined via the theme, see Chapter 4.2.4.3, "DISPlay
Subsystem", on page 923, and are thus ignored in the SCPI command
Remote Control – Commands