Remote Control
R&S
®
FSVA/FSV
975Operating Manual 1176.7510.02 ─ 09
ID command ("Identification String" setting). Thus, any device model whose command
set is compatible with one of the supported device models can be emulated.
Supported languages
Language Comment
SCPI
71100C Compatible to 8566A/B
71200C Compatible to 8566A/B
71209A Compatible to 8566A/B
8560E
8561E
8562E
8563E
8564E
8565E
8566A Command sets A and B are available. Command sets A and B differ in the rules
regarding the command structure.
8566B
8568A Command sets A and B are available. Command sets A and B differ in the rules
regarding the command structure.
8568A_DC Uses DC input coupling by default if supported by the instrument
8568B Command sets A and B are available. Command sets A and B differ in the rules
regarding the command structure.
8568B_DC Uses DC input coupling by default if supported by the instrument
8591E Compatible to 8594E
8594E Command sets A and B are available. Command sets A and B differ in the rules
regarding the command structure.
PSA89600
PSA
ESA
Notes:
●
If you select a language other than "SCPI", the GPIB address is set to 18 if it was
20 before.
●
The Start/stop frequency, reference level and number of sweep points are adapted
to the selected instrument model.
●
When you switch between remote control languages, the following settings or
changes are made:
SCPI:
Remote Control – Commands
To Next Page
Loading...
