Rohde & Schwarz FSVA - Page 977

Remote Control
R&S
®
FSVA/FSV
977Operating Manual 1176.7510.02 ─ 09
Command Supported subset Function Corresp. HP-
Models
Status
ABORT
1)
ABORT Stop previous function HP 856xE/
HP 8566B/HP
8568B/HP
8594E
available
ADD Add HP 8566B/
HP 8568B/
HP 8594E
available
ADJALL ADJALL Adjust all HP 856xE/
HP 8566B/
HP 8568B/
HP 8594E
available
ADJCRT
2)
ADJCRT Adjust CRT HP 856xE/
HP 8566B/
HP 8568B/
HP 8594E
available
ADJIF
2)
ADJIF Auto adjust IF HP 856xE/
HP 8566B/
HP 8568B/
HP 8594E
available
AMB AMB ON|OFF
AMB 1|0
AMB?
Trace A – B -> Trace A HP 856xE/
HP 8594E
available
AMBPL AMBPL ON|OFF
AMBPL 1|0
AMBPL?
HP 856xE/
HP 8566B/
HP 8568B/
HP 8594E
available
AMPCORDATA AMPCORDATA
<freq>,<amp>,..
AMPCORDATA?
Amplitude Correction
Data
HP 856xE available
AMPCOR AMPCOR ON|OFF
AMPCOR 1|0
AMPCOR?
Amplitude Correction HP 856xE available
AMPCORSIZE AMPCORSIZE? Amplitude Correction
Data Array Size
HP 856xE available
AMPCORRCL AMPCORRCL <numeric
value>
Amplitude Correction
Recall
HP 856xE available
AMPCORSAVE AMPCORSAVE
<numeric value>
Amplitude Correction
Save
HP 856xE available
Remote Control – Commands