Instrument Function
R&S
®
SMB100A
85Operating Manual 1407.0806.32 ─ 13
Firmware
The Firmware section of the menu shows the firmware version and the version of the
software platform.
Note: Your instrument is delivered with the latest firmware version available. Firmware
updates as well as the Release Notes describing the improvements and modifications
are provided on the Internet at the download site of the Rohde & Schwarz Signal gener-
ator home page. This home page always offers the latest information on your signal gen-
erator, e.g. also on changes of the firmware update procedure.
Remote command:
n.a.
Hardware Options / Software Options
The tables in the sections "Hardware" and "Software" list the installed hardware and
software options.
"Option"
Short name of option
"Designation"
Name of Option
Remote command:
*OPT? on page 245
*IDN? on page 245
Loaded Modules
Section "Loaded Modules" is provided for service purposes. It lists all loaded software
modules with their versions and offers a short description of each module.
Remote command:
n.a.
5.2.3.4 Manage License Keys
This dialog is the central dialog for managing licenses, like enabling newly purchased
and/or newly registered options or performing the required instrument related steps dur-
ing the process of unregistration of licenses.
An option is ready to operate after it is enabled by means of a license key code supplied
with the option. The license key is delivered as a file or on paper. Unregistered licenses
must be registered for a particular instrument prior to the corresponding option can be
enabled for operation.
General Instrument Settings
To Next Page
Loading...
