Rohde & Schwarz SMB100A - [:Source]:Correction:cset:catalog?; [: S Ource<Hw>]: C Orrection: C SET: D ATA: F Requency; [: S Ource]: C Orrection: C SET: C Atalog

Remote Control Commands
R&S
®
SMB100A
292Operating Manual 1407.0806.32 ─ 13
for compensating the frequency response of cables. The correction values can be
acquired any time irrespective of the modulation settings of the generator.
[:SOURce]:CORRection:CSET:CATalog?.........................................................................292
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency....................................................292
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency:POINts?.......................................293
[:SOURce<hw>]:CORRection:CSET:DATA:POWer...........................................................293
[:SOURce<hw>]:CORRection:CSET:DATA:POWer:POINts?..............................................294
[:SOURce<hw>]:CORRection:CSET:DATA[:SENSor<ch>][:POWer]:SONCe........................294
[:SOURce]:CORRection:CSET:DELete............................................................................294
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog?..............................................295
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension.............................................295
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect..................................................295
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn................................296
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal................................296
[:SOURce<hw>]:CORRection:DEXChange:EXECute.........................................................297
[:SOURce<hw>]:CORRection:DEXChange:MODE............................................................297
[:SOURce<hw>]:CORRection:DEXChange:SELect............................................................298
[:SOURce<hw>]:CORRection:CSET[:SELect]...................................................................298
[:SOURce<hw>]:CORRection[:STATe].............................................................................299
[:SOURce<hw>]:CORRection:VALue?.............................................................................299
[:SOURce]:CORRection:CSET:CATalog?
The command requests a list of user correction tables. The individual lists are separated
by commas.
The lists are stored with the fixed file extensions *.uco in a directory of the user's choice.
The directory applicable to the commands is defined with the command
MMEMory:CDIR.
Return values:
<Catalog> string
Example:
MMEM:CDIR '/var/user/ucor'
selects the directory for the user correction files.
CORR:CSET:CAT?
queries which correction tables are available.
Response:UCOR1,UCOR2,UCOR3
the correction tables UCOR1, UCOR2 and UCOR3 are available.
Usage: Query only
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency <Frequency>
The command transfers the frequency data to the table selected
with :CORRection:CSET:SELect.
The numerical suffix at SOURce must not be used for this command.
SOURce Subsystem