Instrument Function
R&S
®
SMB100A
111Operating Manual 1407.0806.32 ─ 13
If the list has been deleted in the meantime, an error message appears when the instru-
ment setting is loaded. If the list has been overwritten in the meantime, the new entries
will be used.
Remote command:
:MMEMory:LOAD:STATe on page 273
*RCL on page 246
Recall Immediate x
Loads the selected configuration from one of the three intermediate memories.
If an instrument setting in which a sweep was activated is stored, the sweep is started
when the recall command is called.
If an instrument setting which accesses lists is stored, this list is also loaded.
If the list has been deleted in the meantime, an error message appears when the instru-
ment setting is loaded. If the list has been overwritten in the meantime, the new entries
will be used.
A message appears if no instrument configuration is stored in this memory.
Remote command:
*RCL on page 246
5.2.8.4 File Manager
The "File Management" dialog provides all the functions required for file management.
Directories can be created, and files copied, deleted and moved between the directories
on the devices (internal flash memory and memory stick).
For more information, see chapter 4.7.2, "File Manager", on page 73.
File Type
Selects the file types to be indicated. If a file type with a specific file extension is selected
only files with this extension are indicated in the selected directory.
Remote command:
n.a.
General Instrument Settings
To Next Page
Loading...
