Rohde & Schwarz SMB100A - Page 128

Instrument Function
R&S
®
SMB100A
112Operating Manual 1407.0806.32 ─ 13
Directory and File Name
Selects the directory in which the file to be deleted or copied is located. The window lists
all files in this directory. The file to be deleted or copied can be highlighted. The path is
indicated above the directory window.
Remote command:
:MMEMory:CDIRectory on page 270
Cut
Cuts the selected file. It can be pasted into a different directory using the "Paste" button.
Remote command:
:MMEMory:DELete on page 272
Copy
Copies the selected file. It can be pasted into a different or the same directory using the
"Paste" button. When pasting the file into the same directory file name
Copy of <file name> is given automatically. When pasting the file into a different
directory, the original file name is kept.
Remote command:
:MMEMory:COPY on page 270
Paste
Pastes the file that has been copied or cut before.
Remote command:
n.a.
Rename
Renames the selected file or directory. The new name can be entered in the "New File-
name" dialog.
Remote command:
:MMEMory:MOVE on page 273
Delete
Deletes the selected file. Before the file is deleted, a message appears prompting the
user to confirm deletion of the file.
Remote command:
:MMEMory:DELete on page 272
Create New Directory
Creates a new directory. The name of the new directory can be entered in the "New
Directory" dialog.
Note: When the subdirectory is entered, it is possible to enter an absolute path name
(e.g. /var/user/USER/MEAS) or the path relative to the current directory (e.g. ../
MEAS).
The directory is created as a subdirectory in the selected level.
Remote command:
:MMEMory:MDIRectory on page 273
General Instrument Settings