Rohde & Schwarz SMB100A - Editors; Working with List Editor

Manual Operation
R&S
®
SMB100A
68Operating Manual 1407.0806.32 ─ 13
2. Confirm with "OK" to abort the changes.
Select "Cancel" to return to the dialog. The previous selected settings are displayed.
Restoring values after an extended calculation has been started
Calculation and setting might require different period of time. Many settings are made
without noticeable calculation times; such operations are indicated by a "BUSY" message
displayed in the status field of the header section.
A window with a progress indicates that the instrument performs an extended calculation
that requires longer calculation time. The termination of such a calculation restores the
previous values.
► Press the ABORT button to terminate the calculation.
All previous values are restored.
4.5 Editors
The R&S SMB provides user-friendly editors for defining lists. Lists containing frequency
and level value pairs are used for the list mode and the user-defined level correction.
The lists are saved to files and may thus have any length. The file name of the lists and
the directory to which the files are saved are user-selectable. The file prefix is different
for each list type and is permanently assigned by the system.
For information about file handling and overview of the automatically assigned file pre-
fixes, refer to chapter 4.7, "File Management", on page 71.
4.5.1 Working with List Editor
The "User Correction" and "List Mode" dialogs provide a list editor for defining the fre-
quency/level value pairs.
Editing list mode data lists
1. To access a list editor and open an existing data list for editing, use the cursor keys
to select the associated button "Edit User Correction Data..." or "Edit List Mode
Data..." (if available) in the individual menu.
The selected list is displayed and the cursor marks the first row of the "Frequency/
Hz" column.
Editors