Rohde & Schwarz SMB100A - Hcopy:file[:Name]:Auto[:File]:Day; Hcopy:file[:Name]:Auto[:File]:Month

Remote Control Commands
R&S
®
SMB100A
262Operating Manual 1407.0806.32 ─ 13
Usage: Query only
Manual operation: See "File Info" on page 104
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY?
The command returns the day of the current system date which will be used in the file
name if automatic naming is activated.
Return values:
<Day> integer
Range: 1 to 31
*RST: 1
Example:
HCOP:FILE:AUTO:DAY?
returns the day in the date part of the automatic file name.
Usage: Query only
:
HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe <State>
This command activates the usage of the day in the automatic file name.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: ON
Example:
HCOP:FILE:AUTO:DAY:STAT OFF
deactivates the use of the day in the automatically generated file
name.
Manual operation: See "File Options" on page 104
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh?
This command queries the month in the date part in the automatic file name.
Return values:
<Month> integer
Range: 1 to 12
*RST: 1
Example:
HCOP:FILE:AUTO:MONT?
queries the month in the date part in the automatic file name.
Usage: Query only
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe <State>
This command activates the usage of the month in the automatic file name.
HCOPy Subsystem