Remote Control Commands
R&S
®
SMB100A
298Operating Manual 1407.0806.32 ─ 13
Example:
CORR:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into user correction lists.
CORR:DEXC:AFIL:SEL
'/var/user//user/ucor/import/ucor.csv'
selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL
'/var/user//user/ucor/import/ucor_imp'
selects that the ASCII file ucor.csv is imported into user correction
list ucor_imp.
Manual operation: See "Mode - User Correction" on page 138
[:SOURce<hw>]:CORRection:DEXChange:SELect <Filename>
The command selects the user correction list to be imported or exported.
The user correction files are stored with the fixed file extensions *.uco in a directory of
the user's choice. The directory applicable to the commands is defined with the command
MMEMory:CDIR. A path can also be specified in command SOUR:CORR:DEXC:SEL, in
which case the files are stored or loaded in the specified directory.
Parameters:
<Filename> <list name>
Example:
CORR:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into user correction lists.
CORR:DEXC:AFIL:SEL '/var/user/import ucor.csv'
selects that ASCII file ucor.csv is imported.
CORR:DEXC:SEL '/var/user/import ucor_imp'
selects that the ASCII file ucor.csv is imported into user correc-
tion list ucor_imp.
Manual operation: See "Destination / Source - User Correction" on page 139
[:SOURce<hw>]:CORRection:CSET[:SELect] <Filename>
The command selects the table for user correction. Level correction must also be acti-
vated with the command SOURce<hw>:CORRection:CSET:STATe ON.
The lists are stored with the fixed file extensions *.uco in a directory of the user's choice.
The directory applicable to the commands is defined with the command
MMEMory:CDIR. A path can also be specified in command :SOUR:CORR:CSET:SEL, in
which case the files in the specified directory are selected.
Parameters:
SOURce Subsystem
To Next Page
Loading...
