Rohde & Schwarz SMB100A - File Select Dialog

Manual Operation
R&S
®
SMB100A
72Operating Manual 1407.0806.32 ─ 13
Lists, e.g. user correction lists, can be loaded. They can be generated either exter-
nally or internally. For internal generation, a new list must be created in the "File
Select" dialog which will then be edited in the list editor of the individual menu.
For more information, refer to:
● chapter 4.8, "Legend of Front-Panel Controls", on page 75 for an overview of key
functions and a cross-reference between the front panel keys and the keyboard
shortcuts
●
to section "Instrument Functions" for a detailed description of key functions.
Accessing files with user data
1. To access an editable user data file, select the "Save/Recall" or "File Manger" function
in the individual dialog.
2. To access a loadable data file, select the "Select/New" or "File Manager" function in
the individual dialog.
3. To access the "File Manager" function, press the SETUP (CTRL+E) key and select
"Save/Recall > File Manager".
A "File Select" window for loading, saving or creating a file or the "File Manager"
dialog for managing all files is displayed.
Saving and loading of all instrument settings
All instrument settings are saved and loaded in the "File" menu.
To access the "File" menu, press the FILE (CTRL+S) key.
For more information, see chapter 5.2.8, "Storing and Loading Instrument Data - File
Key", on page 107.
4.7.1 File Select Dialog
The "Save/Recall" dialaog displays the available drives and directories. In the upper part,
"Recent Data Sets", the files last used are listed.
File Management