Remote Control Commands
R&S
®
SMB100A
266Operating Manual 1407.0806.32 ─ 13
:KBOard:LAYout <Layout>
This command selects the keyboard language. The assignment of some keys depends
on the selected language.
Parameters:
<Layout> CHINese | DANish | DUTCh | DUTBe | ENGLish | ENGUK |
FINNish | FRENch | FREBe | FRECa | GERMan | ITALian |
JAPanese | KORean | NORWegian | PORTuguese | RUSSian |
SPANish | SWEDish | ENGUS
*RST: US
Example:
KBO:LAY US
activates American keyboard layout.
Manual operation: See "Layout (Keyboard)" on page 93
7.9
MMEMory Subsystem
The MMEMory subsystem (Mass Memory) contains the commands for managing files
and directories as well as for loading and storing complete instrument settings in files.
The files are stored on the internal flash memory of the instrument or on external USB
memory devices.
The /var directory can be used to save user-defined data; any subdirectory structure
can be created on /var. Some default subdirectories are predefined, but can be changed
at any time.
The default directory is determined using the command MMEMory:CDIR.
Use the command :SYSTem:MMEMory:PATH:USER? to query the path of the directory
for user-defined data.
The /opt directory is a protected and therefore a not accessible system directory. The
files on this directory contain data that must not be changed. Therefore, this directory
should not be accessed, since reconstruction of the system partition will lead to data loss.
7.9.1 File Naming Conventions
To enable files in different file systems to be used, the following file naming conventions
should be observed.
The file name can be of any length and is case-sensitive, meaning it is distinguished
between uppercase and lowercase letters.
The file and the optional file extension are separated by a dot. All letters and numbers
are permitted (numbers are, however, not permitted at the beginning of the file name). If
possible, special characters should not be used. The use of the slashes "\" and "/" should
MMEMory Subsystem
To Next Page
Loading...
