Rohde & Schwarz SMB100A - H Copy: F ILE[: N AME]: a UTO: S Tate; Hcopy:file[:Name]:Auto[:File]:Year

Remote Control Commands
R&S
®
SMB100A
264Operating Manual 1407.0806.32 ─ 13
Parameters:
<State> 0 | 1 | OFF | ON
*RST: ON
Example:
HCOP:FILE:AUTO:PREF:STAT OFF
deactivates the usage of the prefix in the automatic file name.
Manual operation: See "File Options" on page 104
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR?
This command queries the year in the date part in the automatic file name.
Return values:
<Year> integer
Range: 1784 to 8000
*RST: 0
Example:
HCOPy:FILE:AUTO:YEAR?
queries the year in the date part in the automatic file name.
Usage: Query only
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe <State>
This command activates the usage of the year in the automatic file name.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: ON
Example:
HCOP:FILE:AUTO:YEAR:STAT OFF
deactivates the usage of the year in the automatic file name.
Manual operation: See "File Options" on page 104
:HCOPy:FILE[:NAME]:AUTO:STATe <State>
This command activates/deactivates automatic naming of the hardcopy files.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: ON
Example:
HCOP:FILE:AUTO:STAT OFF
deactivates automatic naming.
Manual operation: See "Automatic Naming" on page 103
HCOPy Subsystem