Rohde & Schwarz SMB100A - Kboard Subsystem

Remote Control Commands
R&S
®
SMB100A
265Operating Manual 1407.0806.32 ─ 13
:HCOPy:IMAGe:FORMat <Format>
This command selects the bitmap graphic format for the screenshot. It is also possible
to directly retrieve the data using command HCOP:DATA?.
This command is an alias to command HCOPy:DEVice:LANGuage.
Parameters:
<Format> BMP | JPG | XPM | PNG
*RST: BMP
Example:
HCOP:IMAG:FORM XPM
selects the image format XPM.
:
HCOPy:IMAGe:SIZE <Size>
The command selects the image size of the hardcopy. The first value of the size setting
defines the width, the second value the height of the image.
Parameters:
<Size> string
*RST: depends on device
Example:
HCOP:IMAG:SIZE 640,480
sets width and height of the image.
Manual operation: See "File Options" on page 104
7.8 KBOard Subsystem
The KBOard system contains the commands to set the external keyboard.
:KBOard:LANGuage.......................................................................................................265
:KBOard:LAYout............................................................................................................266
:KBOard:LANGuage <Language>
This command selects the keyboard language. The assignment of some keys depends
on the selected language.
Parameters:
<Language> US | DE
*RST: US
Example:
KBO:LANG US
selects keyboard language American English.
Usage: SCPI confirmed
Manual operation: See "Layout (Keyboard)" on page 93
KBOard Subsystem