Manual Operation
R&S
®
SMB100A
74Operating Manual 1407.0806.32 ─ 13
Use the "File Type" to select a file type form the list. This can be used to process either
all files (all files (*) selection) or a specific selection of files. See chapter 4.7.2.1, "Exten-
sions for User Files", on page 74 for an overview of the supported file extensions. The
available drives and directories and the files of the selected directory are displayed. The
currently selected path is displayed above the windows. If the area is opened several
times, the path last selected is displayed. Unlike the "File Select" window, the "File Man-
ager" displays the full file names including extensions.
Working with the File Manager dialog
1.
Accessing the "File Manager" dialog (see "Accessing files with user data"
on page 72).
2. Navigating in the "File Manager" dialog.
Operation is similar to the operation of menus with several areas.
3. Moving, duplicating, deleting or renaming files
To move a file, select the file and press the "Cut" button. Mark the directory to which
the file is to be moved and select the "Paste" button. If the target directory already
contains a file with the same name, a confirmation query is displayed to confirm
overwriting of this file.
Perform the similar steps and cut/copy/rename/delete the file.
Tip: The operation corresponds to the Windows concept.
4. Creating a new directory
Mark drive or directory level where the new directory is to be created, select the
"Create New Directory" button and enter the name of the new directory in the entry
window that opens. Confirm with ENTER.
4.7.2.1 Extensions for User Files
The following table lists all available file extensions for user files. The currently available
files on the instrument depend on the installed options.
File Management
To Next Page
Loading...
