Preparing for Use
R&S
®
SMB100A
38Operating Manual 1407.0806.32 ─ 13
Default password
Remote-access and file access require the user "instrument" with default password
"instrument".
Changing the default user and security passwords
It is highly recommended to change the default user and security passwords in the menu
"Setup > Security" before connecting the instrument to the network (see section chap-
ter 5.2.3.15, "Security", on page 97).
2.7.1 Using a Web Browser for Remote Access
The instrument can be remote-accessed via any Web browser, like Windows Internet
Explorer or Mozilla Firefox for instance.
To remote access the instrument via Web browser:
1.
Connect the instrument and the remote computer to a LAN, see chapter 2.6.1, "Con-
necting the Instrument to the Network", on page 34.
2. Instal the Java Runtime Environment JRE on the remote computer.
3. Type the instruments' IP address in the address field of the Web browser on your PC,
e.g. http://10.111.11.1
The "VNC Authentication" screen appears.
4. Enter the password and select "OK".
The default password is "instrument".
After the connection is established, the current signal generator screen with the block
diagram is displayed and the instrument can be remote-accessed from the remote
computer.
Remote Access via an External Controller
To Next Page
Loading...
