Rohde & Schwarz SMB100A - [: S Ource<Hw>]: P ULM: T Rain: S Elect; [: S Ource<Hw>]: P ULM: T Rigger: E Xternal: G ATE: P Olarity

Remote Control Commands
R&S
®
SMB100A
358Operating Manual 1407.0806.32 ─ 13
Return values:
<Points> integer
Range: 0 to INT_MAX
Increment: 1
*RST: 0
Example:
MMEM:CDIR 'var/lists/pulsetrain'
selects the directory for the pulse train files.
PULM:TRA:SEL ‘P_INCR'
selects P_INCR for editing. P_INCR is created if it does not yet
exist.
PULM:TRA:REP:POIN?
queries the number of repetition values in P_INCR
Response: 7
P_INCR has 7 repetition entries.
Usage: Query only
Options: R&S SMB-K27 (Pulse Train)
[:SOURce<hw>]:PULM:TRAin:SELect <Filename>
Selects the specified pulse train file. If a new file is to be created, the name can be entered
here. The file is created if it does not yet exist. The file selected here is available for the
further processing steps (editing) and is used in the instrument when the pulse train mode
is activated.
The files are stored with the fixed file extensions *.pulstrn in a directory of the user's
choice. The directory applicable to the command is defined with the command
MMEMory:CDIR.
*RST does not affect data lists.
Parameters:
<Filename> string
Example:
MMEM:CDIR '/var/user/lists/pulsetrain'
selects the directory for the pulse train files.
PULM:TRA:SEL ‘P_INCR'
selects P_INCR for editing. P_INCR is created if it does not yet
exist.
Options: R&S SMB-K27 (Pulse Train)
Manual operation: See "Pulse Train Data – Pulse Generator" on page 198
[:SOURce<hw>]:PULM:TRIGger:EXTernal:GATE:POLarity <Polarity>
Selects the polarity of the Gate signal.
The signal is supplied via the PULSE EXT connector.
SOURce Subsystem