Rohde & Schwarz SMB100A - S Ystem: D ATE; System:osystem; System:time; System:version

Remote Control Commands
R&S
®
SMB100A
403Operating Manual 1407.0806.32 ─ 13
:SYSTem:TIME <Time>
Queries or sets the time for the instrument-internal clock.
The parameter is protected, in order to prevent accidental changes.
It can be accessed with protection level 1, see :SYSTem:PROTect<ch>[:STATe]
on page 402.
Parameters:
<Time> 0...23,0...59,0...59
Example:
:SYSTem:TIME?
Response: 12,0,0 it is precisely 12 pm.
Manual operation: See "Time" on page 90
:
SYSTem:DATE <Date>
Queries or sets the date for the instrument-internal calendar.
This parameter is protected, in order to prevent accidental changes.
It can be accessed with protection level 1, see :SYSTem:PROTect<ch>[:STATe]
on page 402.
Parameters:
<Date> <year>,<month>,<day>
Example:
SYST:DATE?
Response: 2011,05,01 - it is the 1st of May in 2011.
Manual operation: See "Date" on page 90
:SYSTem:VERSion?
Queries the SCPI version with which the instrument complies.
Return values:
<Version> string
Example:
SYST:VERS
queries the SCPI version.
Response: 1996
The instrument complies with the version from 1996.
Usage: Query only
:SYSTem:OSYStem?
Queries the operating system of the instrument.
Return values:
<OperSystem> string
SYSTem Subsystem