Rohde & Schwarz SMB100A - H Copy: F ILE[: N AME]: a UTO: D Irectory; Hcopy:file[:Name]:Auto:directory:clear; Hcopy:file[:Name]:Auto:file

Remote Control Commands
R&S
®
SMB100A
261Operating Manual 1407.0806.32 ─ 13
:HCOPy:FILE[:NAME]:AUTO:DIRectory <Directory>
This command defines the directory into which the hardcopy files will be stored if auto
naming is activated (HCOP:FILE:AUTO:STAT ON).The directory will be created if it does
not exist yet.
Parameters:
<Directory> string
*RST: .\HCopy
Example:
HCOP:FILE:AUTO:DIR '/usb/temp//HCopy'
defines the destination directory '/usb/temp//HCopy'
Manual operation: See "File Options" on page 104
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar
This command deletes all files with extensions "bmp", "img", "png" and "xpm" in the
directory set for automatic naming.
Example:
HCOP:FILE:AUTO:DIR:CLE
deletes all image files with extensions "bmp", "img", "png" and
"xpm".
Usage: Event
Manual operation: See "File Options" on page 104
:HCOPy:FILE[:NAME]:AUTO:FILE?
This command queries the file name that what generated using the automatic naming
settings. By default the automatically generated file name is composed of:
<Prefix><YYYY><MM><DD><Number>.<Format>.
Each component can be deactivated/activated separately to individually design the file
name.
Return values:
<File> string
Example:
HCOP:DEV:LANG BMP
selects output format *.bmp.
HCOP:FILE:AUTO:DIR '/usb/temp//HCopy'
defines the destination directory '/usb/temp//HCopy'
HCOP:FILE:AUTO:PREF 'gen'
the file name starts with the prefix 'gen'. The usage of automatic
naming with prefix and date in the file name is preset (…:STAT
ON).
HCOP
triggers the generation of a hardcopy of the current trace.
HCOP:FILE:AUTO:FILE?
queries the file name
Response: 'gen101012008001.bmp'
HCOPy Subsystem