Rohde & Schwarz SMB100A - Hardcopy Options

Instrument Function
R&S
®
SMB100A
104Operating Manual 1407.0806.32 ─ 13
File Info
Indicates the file name. The file name can be entered either manually via the file manager
(button "File…") or generated automatically (Automatic naming checkbox). Automatic
naming is configured in the "Options…" submenu.
Remote command:
:HCOPy:FILE[:NAME] on page 260
:HCOPy:FILE[:NAME]:AUTO:FILE? on page 261
5.2.5.2 Hardcopy Options
This section describes the "Hardcopy Options" dialog.
File Options
Dialog for setting the file parameters.
"Size"
Defines the size of the bitmap in terms of pixels. The first value of the
size setting defines the width, the second value the height of the image.
Remote command:
:HCOPy:IMAGe:SIZE on page 265
"Format"
Selects the image format. Several bitmap formats are available.
Remote command:
:HCOPy:DEVice:LANGuage on page 259
"Automatic
Naming"
Determines the rules to create the file names and sets the directory the
files are saved into.
As default the automatically generated file name is composed of:
<Path>/<Prefix><YYYY><MM><DD><Number>.<Format>
Each component can be deactivated/activated separately to individu-
ally design the file name. The resulting file name is indicated.
General Instrument Settings