Rohde & Schwarz SMB100A - Modulation; Overview of Modulation

Instrument Function
R&S
®
SMB100A
167Operating Manual 1407.0806.32 ─ 13
From
Sets the start value of the index range.
Remote command:
n.a.
Range
Sets the range for filling the table.
Remote command:
n.a.
Select column to fill
Selects either the frequency or the level column to be filled with the value defined below.
Remote command:
n.a.
Start value
Sets the start value for the frequency or the level entries.
Remote command:
n.a.
End value
Sets the end value for the frequency or the level entries.
Remote command:
n.a.
Increment value
Sets the increment for the frequency or the level entries.
Remote command:
n.a.
Fill
Fills the selected column in the set range with values, starting with the start value and
using the set increment.
Remote command:
n.a.
5.4 Modulation
5.4.1 Overview of Modulation
The R&S SMB provides amplitude modulation (AM), frequency modulation (FM), phase
modulation (PM), pulse modulation and stereo modulation. In addition, the RF signal can
be modulated with internal modulations waveforms, e.g. sine waves and rectangular sig-
nals.
Modulation