Rohde & Schwarz SMB100A - [: S Ource<Hw>]: P ULM: S Tate; [: S Ource<Hw>]: P ULM: T Rain: D Elete; [:Source<Hw>]:Pulm:train:catalog

Remote Control Commands
R&S
®
SMB100A
354Operating Manual 1407.0806.32 ─ 13
Example:
PULM:SOUR INT
selects the internal modulation source.
PULM:STAT ON
activates the pulse modulation.
Usage: SCPI confirmed
Options: R&S SMB-K21 or R&S SMB-K22 (Pulse Modulator)
Manual operation: See "Source" on page 180
[:SOURce<hw>]:PULM:STATe <State>
Activates/deactivates the pulse modulation.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: OFF
Example:
PULM:STAT ON
activates pulse modulation.
Options: R&S SMB-K21 or R&S SMB-K22 (Pulse Modulator)
Manual operation: See "State" on page 180
[:SOURce<hw>]:PULM:TRAin:CATalog?
Queries a list of available pulse train files. The individual pulse train files are separated
by commas.
The files are stored with the fixed file extensions *.pulstrn in a directory of the user's
choice. The directory applicable to the commands is defined with the command
MMEMory:CDIR.
Return values:
<Catalog> string
Example:
MMEM:CDIR '/var/user/lists/pulsetrain'
selects the directory for the pulse train files.
PULM:TRA:CAT?
queries the available files.
Response: 'P_CONS','P_INCR','P_DECR'
the lists P_CONS, P_INCR and P_DECR are available.
Usage: Query only
Options: R&S SMB-K27 (Pulse Train)
Manual operation: See "Pulse Train Data – Pulse Generator" on page 198
[:SOURce<hw>]:PULM:TRAin:DELete <Filename>
Deletes the specified pulse train file.
SOURce Subsystem