Instrument Function
R&S
®
SMB100A
89Operating Manual 1407.0806.32 ─ 13
●
Where you can find the description...
Since this section is relevant when an R&S SMZxxx frequency multiplier is connected,
you can find a detailed description in the user manual of the frequency multiplier. It
is included in the online help of the R&S SMB, but can also be found in pdf format on
the CD, or on the R&S website http://www.rohde-schwarz.com/product/SMZ.html.
5.2.3.8 Selftest
A selftest is provided for service purposes. The selftest is a protected test procedure,
which can be accessed if protection level 1 is disabled. The protection dialog is called in
the "Setup" menu (see chapter 5.2.3.14, "Protection", on page 96).
The following tests are only available via remote control:
● :TEST<hw>:DIRect on page 405
Selftest
Performs a selftest on all installed hardware options.
A list of the performed tests cases and the result of each of them (passed or failed) is
displayed.
Remote command:
:TEST<hw>:ALL:STARt on page 404
:TEST<hw>:ALL:RESult? on page 405
5.2.3.9 Check Front Panel
The "Check Front Panel" dialog is used to check whether the front panel keys are func-
tioning correctly. The menu displays all the front panel keys arranged in the same way
as on the front panel. The respective function is executed by pressing the associated key.
General Instrument Settings
To Next Page
Loading...
