Rohde & Schwarz SMB100A - Hcopy[:Execute]

Remote Control Commands
R&S
®
SMB100A
259Operating Manual 1407.0806.32 ─ 13
Return values:
<Data> string
Example:
HCOP:DEV:LANG JPG
HCOP:DATA?
transfers the hardcopy to the remote client.
Usage: Query only
:HCOPy:DEVice <Device>
The command defines the output device. The hardcopy can be output in a file. The
HCOPy:FILE:… commands are used for configuration. The file is accessible using the
MMEM:.. commands. In addition, the hardcopy data can be directly transferred to the
remote client using command :HCOPy:DATA?.
Parameters:
<Device> FILE
*RST: FILE
Example:
HCOP:DEV FILE
the hardcopy will be stored in a file.
Manual operation: See "Destination" on page 103
:HCOPy:DEVice:LANGuage <Language>
The command selects the bitmap graphic format for the screenshot. It is also possible to
directly retrieve the data using command HCOP:DATA?. This command is an alias to
command HCOPy:IMAGe:FORMat.
Parameters:
<Language> BMP | JPG | XPM | PNG
*RST: BMP
Example:
HCOP:DEV:LANG BMP
selects bitmap as image format.
HCOP:FILE '/usb/temp//HCopy'
defines the directory, path and file name for storing the hardcopy.
HCOP
triggers the hardcopy generation.
Manual operation: See "File Options" on page 104
:HCOPy[:EXECute]
The command triggers the generation of a hardcopy.
Example:
HCOP
triggers the generation of a hardcopy of the current display.
Usage: Event
HCOPy Subsystem