Rohde & Schwarz SMB100A - S Ystem: C Ommunicate: S Erial: B AUD; S Ystem: C Ommunicate: S Erial: P Arity; S Ystem: C Ommunicate: S Erial: S Bits; System:communicate:socket:resource

Remote Control Commands
R&S
®
SMB100A
400Operating Manual 1407.0806.32 ─ 13
Example:
SYST:COMM:SER:RES
queries the VISA resource string.
Response: ASRL1::INSTR
Usage: Query only
Manual operation: See "Visa Resource Strings" on page 96
:SYSTem:COMMunicate:SERial:BAUD <Baud>
Sets the baudrate for the serial remote control interface.
Parameters:
<Baud> 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200
*RST: 115200
Example:
SYST:COMM:SER:BAUD 115200
enters the baudrate 115200.
Manual operation: See "RS232 using USB adapter" on page 95
:SYSTem:COMMunicate:SERial:PARity <Parity>
Sets the parity for the serial remote control interface.
Parameters:
<Parity> NONE | ODD | EVEN
*RST: NONE
Example:
SYST:COMM:SER:PAR NONE
selects parity NONE.
Manual operation: See "RS232 using USB adapter" on page 95
:SYSTem:COMMunicate:SERial:SBITs <SBits>
Sets the number of stop bits for the serial remote control interface.
Parameters:
<SBits> 1 | 2
*RST: 1
Example:
SYST:COMM:SER:SBIT 2
selects 2 stop bits.
Manual operation: See "RS232 using USB adapter" on page 95
:SYSTem:COMMunicate:SOCKet:RESource?
Queries the visa resource string for remote control via the Socket interface.
Return values:
<Resource> string
SYSTem Subsystem