Rohde & Schwarz SMB100A - Troubleshooting with Internal Adjustments

Instrument Function
R&S
®
SMB100A
138Operating Manual 1407.0806.32 ─ 13
Mode - User Correction
Selects if user correction lists should be imported or exported. The settings offered
depend on the selected mode.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 297
Extension - User Correction
Selects the file extension of the ASCII file to be imported or exported. Selection "TXT"
(text file) or "CSV" (Excel file) is available.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension on page 295
Decimal Point - User Correction
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 296
Column Separator- User Correction
Selects the separator between the frequency and level column of the ASCII table the user
correction list is exported to or imported from.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 296
Select ASCII Source / Destination - User Correction
Calls the "File Manager" for selecting the ASCII file to be imported into a user correction
list (source) or the ASCII file the user correction list is exported (destination) in.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect on page 295
RF Block