Instrument Function
R&S
®
SMB100A
139Operating Manual 1407.0806.32 ─ 13
Destination / Source - User Correction
Calls the "File Manager" for selecting the user correction list to be exported (source) into
an ASCII file or the destination for the ASCII file to be imported (destination) in.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:SELect on page 298
Import / Export - User Correction
Starts the export or import of the selected file.
When import is selected, the ASCII file is imported as user correction list.
When export is selected, the user correction list is exported into the selected ASCII file.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:EXECute on page 297
Filling the Correction List automatically
The "Fill Table" menu enables you to automatically set the level correction values.
The start line and the number of rows to be filled are defined under "From" and "Range."
The column to be filled is selected under "Select column to fill". Depending on the selec-
tion here, the default for start, end, and increment value are set. As the settings are
interdependent, a change of one parameter may result in the automatic change of one
or more of the other parameters. The filling of the column with the selected value settings
is started with button "Fill".
The correction list entries are only computed when the "Fill" button is pressed.
From
Sets the start value of the index range.
Remote command:
n.a.
Range
Sets the range for filling the table.
Remote command:
n.a.
RF Block
To Next Page
Loading...
