Instrument Function
R&S
®
SMB100A
137Operating Manual 1407.0806.32 ─ 13
"Insert Range"
Insert new rows before the marked row. The number of rows to be
inserted can be defined in an entry window.
"Fill...."
Opens a sub menu for defining a set of list values to be automatically
entered in the ucor list (see "Filling the Correction List automatically"
on page 139).
"Fill With Sen-
sor"
Calls the menu to activate the filling of the user correction list with level
values acquired by the selected power sensor (see "Filling the Correc-
tion List with Power Sensor Measurement Data" on page 140).
"Delete Row"
Deletes the marked row.
"Delete
Range..."
Allows to delete any number of rows starting with the marked row. The
number of rows to be deleted can be defined in an entry window.
"Save"
The list is saved under its current name.
Remote command:
[:SOURce<hw>]:CORRection:CSET[:SELect] on page 298
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency on page 292
[:SOURce<hw>]:CORRection:CSET:DATA:POWer on page 293
Import/Export
User correction list can be imported from externally created files or exported into text or
CSV-files. The import/export settings are available after clicking the "Import/Export" but-
ton.
Import/Export >>>
Expands the menu with the area for import and export of user correction files.
Externally edited Excel tables with any number of frequency/level value pairs can be
imported as text or CSV-files and used for user correction.
Conversely, you can also export internally created user correction lists as text or CSV-
files.
RF Block
To Next Page
Loading...
