Rohde & Schwarz SMB100A - Page 236

Remote Control Basics
R&S
®
SMB100A
220Operating Manual 1407.0806.32 ─ 13
currentSocketDescr = 0;
currentHostName = "";
currentPort = 0;
currentHostInfo = NULL;
clientIsConnected = false;
}
void TcpClient::transmit( string &txString )
{
if( !clientIsConnected )
{
throw string("connection must be established before any data can be sent\n");
}
char * transmitBuffer = new char[txString.length() +1];
memcpy( transmitBuffer, txString.c_str(), txString.length() );
transmitBuffer[txString.length()] = '\n'; //newline is needed!
if( send( currentSocketDescr, transmitBuffer, txString.length() + 1, 0 ) < 0 )
{
throw string("can't transmit data\n");
}
delete [] transmitBuffer;
}
void TcpClient::receive( string &rxString )
{
if( !clientIsConnected )
{
throw string("connection must be established before any data can be received\n");
}
char * receiveBuffer = new char[receiveBufferSize];
memset( receiveBuffer, 0, receiveBufferSize );
bool receiving = true;
while( receiving )
{
int receivedByteCount = recv( currentSocketDescr,
receiveBuffer, receiveBufferSize, 0 );
if( receivedByteCount < 0 )
{
throw string("error while receiving data\n");
}
rxString += string( receiveBuffer );
receiving = ( receivedByteCount == receiveBufferSize );
}
delete [] receiveBuffer;
}
string TcpClient::getCurrentHostName( ) const
{
return currentHostName;
}
int TcpClient::getCurrentPort( ) const
{
Starting a Remote Control Session