Remote Control Basics
R&S
®
SMB100A
234Operating Manual 1407.0806.32 ─ 13
Fig. 6-1: Graphical overview of the status registers hierarchy
OPER = Operation Status Summary Bit
RQS/MSS = Service Request Generation
ESB = Standard Event Status Summary Bit
MAV = Message Available in Output Queue
QUES = Querstionable Status Summary Bit
2 = Error- /Event-Queue
1,0 = not used
Note: This legend explains the abbreviations to the Status Byte Register.
The R&S signal generators use the following status registers:
● Status Byte (STB) and Service Request Enable (SRE), see chapter 6.5.3, "Status
Byte (STB) and Service Request Enable Register (SRE)", on page 237.
Status Reporting System
To Next Page
Loading...
