Roland SonicCell User Manual

209
Effects List
Produces three delay sounds; center, left and right.
fig.MFX-47
This effect has four delays.
fig.MFX-48a
fig.MFX-48b
Stereo location of each delay
This effect provides four delays. Each of the Delay Time
parameters can be set to a note length based on the selected
tempo. You can also set the panning and level of each delay
sound.
fig.MFX-49
47:
3TAP PAN DELAY
Parameter
Value Description
Delay Left/
Right/Center
0–2600 ms,
note
Adjusts the time until the delay sound is
heard.
Center
Feedback #
-98– +98%
Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-)
settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
do not want to filter out any high frequen-
cies, set this parameter to BYPASS.
Left/Right/
Center Level
0–127
Volume of each delay
Low Gain -15– +15 dB
Gain of the low frequency range
High Gain -15– +15 dB
Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the delay sound (W)
Level 0–127 Output level
48:
4TAP PAN DELAY
Parameter
Value Description
Delay 1–4 Time
0–2600 ms,
note
Adjusts the time until the delay sound is
heard.
Delay 1 Feed-
back #
-98– +98%
Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-)
settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
do not want to filter out any high frequen-
cies, set this parameter to BYPASS.
Delay 1–4 Level 0–127 Volume of each delay
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the delay sound (W)
Level 0–127
Output level
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance W
Balance D
Balance W
Balance D
Feedback
Center Tap
L in
R in
L out
R out
Quadruple Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Feedback
1
23
4
L
R
49:
MULTI TAP DELAY
Parameter
Value Description
Delay 1–4 Time
0–2600 ms,
note
Adjusts the time until Delays 1–4 are
heard.
Delay 1 Feed-
back #
-98– +98%
Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-)
settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
don’t want to filter out any the high fre-
quencies, set this parameter to BYPASS.
Delay 1–4 Pan L64–63R
Stereo location of Delays 1–4
Delay 1–4 Level 0–127
Output level of Delays 1–4
Low Gain -15– +15 dB
Gain of the low frequency range
High Gain -15– +15 dB
Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
Level 0–127
Output level
L in
R in
L out
R out
Multi Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 3
Delay 4
Delay 2
Feed
back
2-Band
EQ
2-Band
EQ
SonicCell_e.book 209 ページ ２００７年８月９日 木曜日 午後９時１７分

Roland SonicCell Specifications

General

Brand	Roland
Model	SonicCell
Category	Computer Hardware
Language	English