To Next Page
M
Megan YoungAug 10, 2025
Why is the reading noise high on my SCINTREX Measuring Instruments?
- EevanswillieAug 10, 2025
High reading noise in SCINTREX Measuring Instruments can stem from several factors: * Ensure sensor(s) are properly connected. * Verify that manual tuning is correctly set or utilize auto-tuning. * Check the sensor cable connection. * If the sensor cable is broken, it should be repaired. * Confirm proper sensor orientation, aligning either the N or S mark towards magnetic North. * High gradients may cause this issue; monitor the Numeric Page 2 display bar chart. Readings might be impossible in such conditions. * External interference, like power lines, can also cause high noise, potentially making readings impossible. * If there is no fluid in the sensor, contact SCINTREX.
General