Installation procedure
ENVI-MAG Manual C2-11
Installation
STEP 5: Select your printer and port
1. Printer
The next line in this dialogue screen allows you to choose from a wide
variety of common printer types—dot matrix (9 and 24 pin Epson
compatible), inkjet or laser (PCL based).
Figure C-5 Printer selection menu
Please activate the pick list to choose a printer type that most closely
matches the one connected to your computer.
2.
Port
The next line allows you to specify which port your printer is physically
connected to. Please activate the pick list and select the port. Usually you
can select
PRN:, the default, if you are uncertain.
3.
Activate your selections
You must now activate both the video and printer selections by either
pressing
Fg
or by clicking on the Go button.
ENVIMAP Version 3.02.00
Select Video and Printer
printers
Video Graphics (Alt-L
Printer (Alt-L
9-pin letter (8.5x11)
↑
8.5x11)
Printer port (o
9-pin ledger (11x17)
24-pin letter (8.5x11)
24-pin ledger (11x17)
Click on Go or
600 dpi laser (8.5x11)
ction.
300 dpi laser (8.5x11)
150 dpi laser (8.5x11)
HP 500 letter/A4
PJ XL letter (8.5x11)
PJ XL ledger (11x17)
↓
Ok Cancel
cleaR clear All Command Dos Help List eXit Go
G:\ENVIMAP
To Next Page
Loading...
Need help?
General