NVI-MAG
ENVI-MAG Manual A1-1
Chapter
Introduction
1
Introduction
This section is the reference for the ENVI-MAG instrument itself. You will find all
the information you need to know about setting-up the unit for field use, its oper-
ation, maintenance and trouble-shooting. It is divided into eight chapters with
the information flow from chapter to chapter following a natural progression, as
shown in the following table:
CHAPTER Description
Introduction
Outlines what the instrument can do.
Preparation
Describes the assembly of the system for use.
Description
Describes the physical parts of the ENVI console, keypad
and display menus. It also describes the function of each
key and the various modes and parameters shown on all
the display screens.
Setting up
Gives step-by-step instructions on how to set up the
instrument as either a Total Field Magnetometer, a
Gradiometer or a Magnetic Base Station.
Operations
Guides you through typical instrument operation using
basic and advanced configurations in a WALKMAG and a
stop-and-go type of survey.
Data Output
Shows examples of data output formats and explains how
to dump the acquired data.
Maintenance
Describes basic maintenance, trouble-shooting and
repair.
Reference
Contains the instrument parts list and warranty
information.
To Next Page
Loading...
Need help?
General