ENVIMAP Installation
C2-4 ENVI-MAG Manual
Figure C - 1 ENVIMAP main screen
You will now be required to configure ENVIMAP to match your computer system,
that is:
▲ what kind of video you have,
▲ the type of printer,
▲ what port the printer is connected to.
You will also need to tell ENVIMAP where it can create temporary files while
processing.
Menu usage overview
Before you continue with the configuration, a quick overview of the ENVIMAP
menuing system interface will be given in order to help you through this stage.
The ENVIMAP interface
The ENVIMAP system interface is quite easy to work with. You can use either
a mouse or the keyboard cursor keys to move around the various menus.
This section will cover the various aspects of the ENVIMAP interface and
how to use it. If you are already comfortable with using menu systems, then
you can jump to the next section “Configuring” on page C2-8 to finish your
setup of the ENVIMAP system.
ENVIMAP Version 3.02.00
E N V I M A P
Instructions: 1. Use the cursor keys or mouse to highlight menu items.
2. Press Enter, or double-click mouse to select a menu
item and enter a dialogue entry screen.
3. Select dialogue items that you want to change.
4. Press Alt-H or click on Help for parameter help.
5. Press F1, Alt-L or click on LIST to display lists of
options or lists of files.
6. Press Alt-G or click on GO to complete a dialogue
entry screen.
System Configuration AUTOEXEC.BAT and CONFIG.SYS
Prepare the data Video and Printer setup
Create a map Reset to all defaults
Plot
Command Dos Help eXit
G:\ENVIMAP
To Next Page
Loading...
Need help?
General