Menu Reference
ENVI-MAG Manual C3-11
Reference
This option allows you to configure ENVIMAP for your display screen and
output device.
Figure C-11 Video and printer selection dialogue screen
Video Graphics
You can select either an EGA or VGA mode screen for the graphics
previews.
Printer
A pick list of all the available printers is available. Please choose one
that is most appropriate to your installation. The classes of supported
devices include Epson-compatible 9 and 24-pin dot matrix, Hewlett-
Packard PCL compatible laser, and some HP compatible ink-jets.
Please contact SCINTREX ENVI- technical support, if you cannot get
your printer to work with one of these configurations.
Printer Port
You must inform ENVIMAP to which port output should be directed.
The default is to
PRN: and you should not change this unless you know
for certain that your device is connected to another port.
Video and Printer setup
ENVIMAP Version 3.02.00
Select Video and Printer
Video Graphics (Alt-L for a list):
VGA
Printer (Alt-L for a list): 600 dpi laser (8.5x11)
Printer port (or file name): PRN
Click on Go or Press Alt-G to complete selection.
cleaR clear All Command Dos Help List eXit Go
G:\ENVIMAP
To Next Page
Loading...
Need help?
General