Setup
A4-26 ENVI-MAG Manual
4. Press the “NEXT” key. If the following character is on a different key, there is
no need to press the “NEXT” key.
5. Press the “2” key again until e appears.
6. Continue entering in the same way until ‘fence’ is completed.
7. Press the “NEXT” key twice.
8. Press the “1” key.
9. Press “ENTER”.
10. Press the “NOTE” key, followed by the “1” key. You should now see
fence 1 appear further down, under MACRO: 1
Unique notes, belonging to one reading only, are entered in the same way, with
the exception that step 10 is omitted. The note will then be recorded along with
the data. The note entry field is then cleared.
t
2
tt
1
e
61
To Next Page
Loading...
Need help?
General