SCINTREX ENVI-MAG User Manual

Operation
A5-18 ENVI-MAG Manual
9. Enter! the Station number at the Tie-Line.
10. Move the cursor to
LN:
11. Enter! the Line number at the start of the Tie-Line.
12. Press the “TIE-PT” key to take a measurement and record it.
13. Proceed to the next line.
14. Move the cursor to
LN:
15. Press the “+” or”-” key, as appropriate, to change the Line number.
16. Repeat steps 12–15 to complete collecting the tie-line data.
17. Proceed with your normal survey as illustrated in the following
diagram.
Figure A-42
Tie-line method for collecting correction data
Note: If you need more than one day to complete your survey in the Line-type
mode, please make sure that you collect all your Tie-points as the first
data that you store in memory, i.e. before you survey any lines. This
ensures that they will not be erased when clearing memory to make
room for the next day’s data.

SCINTREX ENVI-MAG Specifications

General

Brand	SCINTREX
Model	ENVI-MAG
Category	Measuring Instruments
Language	English