Operating displays
ENVI-MAG Manual A3-29
Instrument
TIE MODE
Allows to select either the Line or Loop
type of tie-line correction.
Note: The Tie-line correction method is
substantially
less precise
than the
base-station correction method.
Line
AUTO
RECORD
A “yes/no” toggle.
This function is used in the semi-auto-
matic mode to save you from having to
press another key.
Auto Record is always in effect in the
base-station operation
or
if the Cycle
Repeat function is selected in the ENVI-
MAG Instrument Setup.
no
Parameter Description Default
To Next Page
Loading...
Need help?
General