Setup
A4-10 ENVI-MAG Manual
6. Enter! 60000 (or whatever value is appropriate for your survey area;
please refer to Figure B-4 on page B1-4, if this value is unknown)
7. Move the cursor to AUTO TUNE
8. Select! yes
9. Move the cursor to TM/DT
10. Press the “ENTER” key and window for the date and time values will
pop-up on the right-hand side of the display.
11. Enter! the time and date (using the steps 2 to 13 on page A4-23).
Warning: If you are using a base-station, please make sure that the time and date
are the same as your field unit. If the time is out, the corrections will be
incorrectly applied. If the date is wrong, no corrections can be
performed at all.
12. Enter your survey grid values as described in“Line and Station setup”
on page A4-7
You are now ready to start surveying.
3
-=
3
TIME: 13:40:35
DATE: 94/10/02 ST: 0. +
SEP: 0.
Main Menu: ESC LN: 0. +
SEP: 0.
Chg?:ENT. 000 help:INFO BATT:134
locations
To Next Page
Loading...
Need help?
General