Setup
A4-22 ENVI-MAG Manual
22. Select! 10 from the following list: 1, 10, 100, 1000, 10000
or your desired chart recorder sensitivity.
23. Move the cursor to AUTO TUNE:
24. Select! no
25. Move the cursor to BASE FIELD:
26. Enter! for now your ambient magnetic field value, if known.
27. Ignore TIE-MODE:
28. Move the cursor to AUTO RECORD:
29. Select! no
30. Press “ESCAPE” to return to the Main operating display.
=
3
=
3
3
3
=
0
To Next Page
Loading...