LOGO! Manual
A5E00380835-01
98
If you are sure that you want to delete the circuit program
from memory:
5. Move the ’>’ cursor to ’Yes’: Press or
6. Press OK.
To prevent unintentional deletion of
your circuit program, you are
prompted to enter your password
(provided you have assigned one).
Password?
ZZ
7. Enter your password.
8. Press OK. The circuit program is deleted.
Note
Although you may have forgotten your password, you can
still delete the circuit program by entering the wrong pass-
word four times.
3.7.13 Summertime/wintertime conversion
You can enable or disable automatic Summertime/winter-
time conversion
in parameter assignment mode by calling the “Set..”
menu command
in programming mode by calling the “Setup” menu com-
mand.
Pro
To Next Page
Loading...
