111
LOGO! Manual
A5E00380835-01
4 LOGO! functions
Organization
LOGO! provides you with various elements in programming
mode. In order to maintain the overview, we have orga-
nized the elements in ’Lists’. These lists are:
Co: Connector list (Connector)
(see Chapter 4.1)
GF: List of the basic functions AND, OR, ...
(refer to Chapter 4.2)
SF: List of the special functions
(refer to Chapter 4.4)
BN: List of reusable blocks configured in the circuit
program
List contents
All lists show the elements available in LOGO! Usually, this
includes all connectors, basic functions and special func-
tions the LOGO! knows. This includes all the blocks you
have created in LOGO! by the time you call the BN list.
If not all is shown
LOGO! does not show all elements if:
No further blocks may be added.
This is either an indication of insufficient memory space
or that the maximum number of blocks has been
reached.
A specific block’s memory space requirement would ex-
ceed the space available in LOGO!
See Chapter 3.8.
To Next Page
Loading...
