Siemens LOGO! - Valid Ranges of the Timebase, if T = Parameter

137
LOGO! Manual
A5E00380835-01
Select the required function by means of the block number.
The timebase is adjustable. Please note the following list-
ing:
Valid ranges of the timebase, if T = parameter
Timebase
max. value min. resolu-
tion
Accuracy
s (seconds) 99:99 10 ms + 10 ms
m (minutes) 99:59 1s + 1 s
h (hours) 99:59 1 min + 1 min
The display in programming mode (example):
B12 +R
T =04:10h
Valid ranges of the timebase, if T = Actual value of an already
programmed function
Timebase max. value Meaning Accuracy
ms 99990 Number of
ms
+ 10 ms
s 5999 Number of s + 1 s
m 5999 Number of
min
+ 1 min
The display in programming mode (example):
B12 +R
T !B006s
LOGO! functions