Siemens LOGO! - User-Defined Parameters

101
LOGO! Manual
A5E00380835-01
Time zone dif-
ference
∆
End of summertimeStart of summertime
NZ First Sunday in Octo-
ber: 02:00––>03:00
Third Sunday in March:
03:00––>02:00
60 Min.
.. Customizing the month
and the day: 02:00––>
02:00 + Time zone dif-
ference
Customizing the month
and the day: 03:00––>
03:00 – Time zone dif-
ference
User-defined
(resolution in
minutes)
Note
You can specify a time zone difference ∆ between 0 and
180 minutes.
Let us assume you want to enable European summertime/
wintertime conversion:
4. Move the ’>’ cursor to ’EU’: Press or
5. Confirm ’EU’: Press OK
LOGO! shows the following display:
>On
Off
S/W Time:
On"EU
LOGO! indicates that European S/W Time conversion is
enabled.
User-defined parameters
If none of the parameters/conversions apply to your coun-
try, you can customize these under menu item ’. .’. To do
so:
1. Confirm ’On’ once again: Press OK
2. Move the ’>’ cursor to ’. .’: Press or
3. Confirm the menu item ’. .’ : PressOK
The display shows:
Pro
g
rammin
g
LOGO!