LOGO! Manual
A5E00380835-01
102
MM–DD
+ : 01–01
– : 01–01
D =000min
Month (MM) and Day (DD)
Start of summertime
End of summertime
The desired time zone difference in
[min]
0
Cursor / solid square
Let us assume you want to configure the following parame-
ters: Start of summertime = 31st of March, end of summer-
time = 1st of November, time difference of 120 minutes.
This is how you can enter your data:
Press or to move the solid square/cursor.
Press and to change the value at the cursor posi-
tion.
The display shows:
0
31. March
1. November
Time difference of 120 min
MM–DD
+ : 03–31
– : 11–01
D =120 min
Confirm all your entries with OK.
You have now customized the summertime/wintertime con-
version. The LOGO! display now shows:
>On
Off
S/W Time:
On"..
LOGO! indicates that summertime/wintertime conversion is
enabled, and that user-defined parameters ( ’..’ ) have been
set.
Pro
To Next Page
Loading...
