Siemens LOGO! - The View in Parameter Assignment Mode (Example); View in Programming Mode (Example)

LOGO! Manual
A5E00380835-01
172
View in programming mode (example):
B3 +R
On =001234
Off=000000
or
B3 +R
On =123456
Off!B021
If the referenced block (B6, in the example) returns a value
that lies out of the valid range, the value is rounded to the
next valid value.
The view in parameter assignment mode (example):
B3
On =001234
Off=000000
Cnt=000120
or
B3
On =123456
Off!B021
Cnt=000120
Current
count value
LOGO! functions