LOGO! Manual
A5E00380835-01
78
Note
LOGO! has now saved your circuit program to nonvolatile
memory. The circuit program remains in the LOGO! me-
mory until you explicitly delete it.
In all LOGO! variants, basic functions, special functions,
time parameters and the operating hours counter (if
present) are always retentive.
Actual values (counter readings, etc.) can additionally be
stored in the case of a power outage. To do this, you must
activate the “Retentive” option in the corresponding
function.
3.7.4 Assigning a circuit program name
You can assign your circuit program a name that consists
of up to 16 uppercase/lowercase letters, numbers and spe-
cial characters.
In the programming menu:
1. To move the “>” cursor to ’Edit..’: Press or
2. To accept ’Edit’: Press OK
3. Move the “>” cursor to ’Edit Name’: Press or
4. To accept ’Edit Name’: Press OK
Press and to list the alphabet from A (a) to Z (z), num-
bers and special characters, either in ascending or de-
scending order. You can select any letter, number or char-
acter.
To enter a space character, simply movie the cursor with
to the next position. This character is the first one in the list.
Examples:
Press once to select an “ A ”
four times to select “ { ”, etc.
Pro
To Next Page
Loading...
